Homes built between 1965 and 1973 in Weatherford, TX frequently contain aluminum branch circuit wiring. Our certified electricians assess your wiring, identify risks, and implement safe, code-compliant solutions to protect your property.
During the late 1960s and early 1970s, a significant number of residential construction projects across the United States, including many neighborhoods in Weatherford, TX, used aluminum instead of copper for branch circuit wiring. At the time, rising copper prices made aluminum an economically attractive alternative, and it was widely adopted before its long-term safety implications became fully understood.
The core problem with aluminum wiring lies in its physical properties when compared to copper. Aluminum expands and contracts at a different rate than copper when it heats and cools under electrical loads. Over years of normal use, this repeated thermal movement causes aluminum wires to loosen at their connection points, including outlets, switches, junction boxes, and circuit breakers. Loose connections are among the leading causes of electrical fires because they create resistance, which generates heat. The Consumer Product Safety Commission has determined that homes with aluminum wiring are significantly more likely to experience fire conditions at electrical connections than comparable homes wired with copper.
Additionally, aluminum oxidizes when exposed to air, forming a layer that increases electrical resistance at connection points. Standard electrical devices are typically designed for copper wiring, and using them with aluminum without proper connectors or anti-oxidant compounds creates further risk. If your Weatherford, TX home was built in the era when aluminum wiring was common, or if you've never had the wiring professionally inspected, scheduling an assessment with Shearer Electrical Services is a critical safety step you should not delay.
Shearer Electrical Services uses two primary approved methods for aluminum wiring remediation in Weatherford, TX. The right approach depends on the extent of the wiring, the condition of your current connections, your budget, and your long-term plans for the property. Our licensed electricians will assess your specific situation and walk you through both options before any work begins.
The first and most thorough option is complete rewiring with copper, which eliminates the aluminum wiring entirely and replaces it with modern copper circuits throughout the home. This approach provides the highest level of long-term safety and is often recommended for homes where the aluminum wiring is showing significant signs of deterioration or where the homeowner plans to remain in the property long-term. It requires more time and investment but delivers a complete, code-compliant electrical system.
The second approved method is pigtailing, which involves attaching short copper wire extensions to the ends of aluminum wires at every device connection using special twist connectors that are rated and listed by UL specifically for aluminum-to-copper connections (often called COPALUM connectors or AlumiConn connectors). The aluminum wire is not removed but rather terminated safely at each connection point using the appropriate listed connector and anti-oxidant compound. This approach is less disruptive than full rewiring and is approved by the Consumer Product Safety Commission when performed correctly by a licensed electrician. In Weatherford, TX, our team has performed this procedure in hundreds of homes, and we ensure every connection is performed with care and documented properly for your records.
Aluminum wiring concerns should never be put off. Our licensed electricians are ready to inspect your Weatherford, TX property and provide a clear path to electrical safety. Call now to schedule your inspection.